The investigation of the bidirectional coupling between a fluid flow and a structure motion is a growing branch of research in science and industry. Applications of the so-called fluid-structure interactions (FSI) are widespread. To improve coupled numerical FSI simulations, generic experimental benchmark studies of the fluid and the structure are necessary. In this work, the coupling of a vortex-induced periodic deformation of a flexible structure mounted behind a rigid cylinder and a fully turbulent water flow performed at a Reynolds number of Re=30. 470 is experimentally investigated with a planar particle image velocimetry (PIV) and a volumetric three-component velocimetry (V3V) system. To determine the structure displacements a multiple-point laser triangulation sensor is used. The three-dimensional fluid velocity results show shedding vortices behind the structure, which reaches the second swiveling mode with a frequency of about 11.2. Hz corresponding to a Strouhal number of St=0.177. Providing phase-averaged flow and structure measurements precise experimental data for coupled computational fluid dynamics (CFD) and computational structure dynamics (CSD) validations are available for this new benchmark case denoted FSI-PfS-2a. The test case possesses four main advantages: (i) the geometry is rather simple; (ii) kinematically, the rotation of the front cylinder is avoided; (iii) the boundary conditions are well defined; (iv) nevertheless, the resulting flow features and structure displacements are challenging from the computational point of view. In addition to the flow field and displacement data a PIV-based force calculation method is used to estimate the lift and drag coefficients of the moving structure. © 2013 Elsevier Ltd.